Cables

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the Road Elite Link Brake Kit

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Replacement parts for Jagwire's Elite Link kits keep things functioning as intended. - Extra links for long housing runs or replacing damaged sections - 20 links at 10mm of length each

Jagwire's Straddle Cables With Adjusters are for use on TRP Eurox and Paul Component Engineering cantilever brakes (brakes sold separately). The adjusters fit onto one brake arm and allow you to turn the rubber-coated ends of the adjusters to fine-tune your brake adjustment by tightening/loosening the Straddle Cables (included but not shown in the photo). You get 2 Straddle Cables and 2 Adjusters. - Rubber-coated white adjusting barrel - Compatible with TRP Eurox and Paul Component Engineering cantilever brakes - Allows for adjustment of link wire/brake - Includes two adjusters and two link wires

Jagwire's Alloy Straddle Cable Carrier w/Liner is a nice upgrade for your cantilever brakes. It's made of light and durable aluminum and has a liner for smooth action.

Jagwire Elite Link End Cap Packs include each of the specialty housing end caps found in the corresponding Jagwire Elite Link DIY kit. - Includes specialty end caps for the 1x Elite Link Shift Kit

Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's Mickey Adjusting Barrels are quality adjusters that mount to most road frames. They make it easy to fine-tune your shift cable tension by hand for optimum shifting performance.

- Replacement cable for the Jagwire Pro Dropper kit - 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables - An easy way to reduce the force required to activate a dropper post remote lever - Perfect for dropper seatposts with "stealth" cable routing and tight housing bends - Includes 2x heat-shrink shims - For use with dropper seatposts ONLY - Length: 2000mm

Fittings for Jagwire hydraulic hose. - Compression bushings (olives) to install Jagwire hydraulic hose with SRAM StealthamaJig type brake levers

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 1600mm liners

Aluminum, Lightweight, Lubricated An alternative to traditional compressionless housing, this system is made of nesting alloy pieces that protect the liner. Although this housing is typically more expensive, it has several advantages including increased flexibility, reduced weight and increased durability. Both shift and brake housings use identical Slick-Lube liners and interconnecting alloy pieces. - Slick-Lube liners reduce friction and protect against corrosion - Includes four 2300mm liners

Jagwire Basics Brake Cable Kits have everything needed to replace the brake cables and housing for a typical bike with rim brakes. - Double-ended cables are compatible with both mountain and road brakes - Lined CEX brake housing - Slick galvanized inner cables are pre-stretched and resist corrosion - Includes everything needed for a complete brake cable and housing replacement on most bikes with rim brakes

DIY Kit Includes: - Housing and Shift Cable - End caps and cable tips - Compatible Shimano/SRAM Specs: - Cable Material: Galvanized - Intended Use: Road/MTB - Cables & Housing Comp: Shimano/SRAM - Housing Length: 2000mm

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - Double-ended SRAM/Shimano mountain and road compatible cable ends - Stainless steel construction resists corrosion - Double Ended: Yes - Cable Head: Shimano/SRAM Road, Shimano/SRAM Mountain - Defined Color: Silver - Quantity Included: 1

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Jagwire's 5mm Anchor Bolt fits certain models and types of brakes and is used to secure the cable in place after adjusting it. It is made of plated metal for strength and durability. You get a pack of 25.

Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. Included in this kit: - 6 x 5mm EZ-Bend segments - Flexible segments slot between road shifter hoods and Pro Compressionless housing run to allow for an appropriate bend at the handlebars

Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

Extend housing runs using these double-ended junction end caps.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.