Accessories

Available in white (3339WH) and gloss black (3339GB) powder coat finishes - Made in U.S.A. (Maysville, KY) - Dimensions: 14.5 x 9.5 x 9 inches (1.25-inch rail on all sides - Two-piece adjustable legs extend from 14" to 22" and mount to either front axle or fork eyelets on bikes with quick release front hubs - Extended handlebar clamps allow greater clearance for shift and brake cables - Handlebar clamps are enlarged to fit 1 1/4", 1" or 7/8" OD handlebars - Rack is furnished with metric fasteners - Combo comes with a Wald 3133 quick release basket (dimensions: 14.5 x 9.5 x 9 inches; tapering to 12.25 x 7 inches) - Basket nests in the rack and locks into place - Lift the handle to release the basket and take it with you - Complete rack and basket combo weighs 4.8 lbs. each

The EXP Series Framepack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - Tapered at the front and along the bottom for maximum carrying capacity - Fits Woodsmoke, Timberjack, and Fargo bikes

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

Park Shop Cone Wrenches are made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on hubs and other bearing assemblies. Their special Y-heads put more material where it's needed for greater strength. Most applications require several cone wrenches, so Park gives you a whole set, featuring 13mm - 24mm, 26mm and 28mm wrenches to suit your repair needs.

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades provides high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of particularly high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working. - "Take-it-easy" tool finder: color coding according to profile and size - With additional short arm for the transmission of extremely high torques due to the leverage of the long arm - Holding function (HF) securely holds the hexagon socket screw on the tool

You know those old movies where they show a woman coming from the market and she has a basket on cruiser with a baguette sticking out of it? Well, Sunlite's Deluxe Quick Release Rattan Basket is that basket. The nice thing is that you can easily take it off your bike and carry it in to the store with you. It attaches to any handlebars via a quick release mount. Its frame is made from steel with a weather-resistant synthetic rattan weave so it can handle a good bit of weight, too.

Wald's medium size twin rear carrier basket is a durable way to carry heavier loads. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry 1-2 small grocery bags in each side basket with greater confidence and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - Dimensions: 6.5 x 13.5 x 10 inches; tapers to 4.5 x 11.5 inches at the bottom - Rack is 5" by 13" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 520 has a Zinc Plated Finish; 520GB has a Black Powder Coat Finish - Complete basket with fittings weighs 5.3 lbs.

RockShox, 11.4118.032.001, Service kit, Vivid Air B1 (Requires Counter Measure tool)

Wera torque indicator with fixed torque for hexagon sockets. The slip clutch guarantees a clearly audible and tactile trigger signal when the set torque value is reached, and is then impossible to apply any further torque. The loosening torque is significantly higher than the set tightening torque, so no additional tools are needed for loosening screw connections. The shape of the handle fills the whole hand well and the fingers lie in the softly rounded recessed grips. This ensures optimal, ergonomic power transmission. - T-handle is ideal for transferring controlled tightening torque and high loosening torque - Error-free screwdriving due to non-slip friction clutch and exact torque transmission - Tamper-proof against accidental changing of set torque value - Corrosion-resistant blade

• Lightweight reinforced nylon construction • Smooth edges won't scratch rims or pinch tubes • Storage clip features built-in abrasive surface

A Weather-Tight Hip Pack For Adventure Riding Get your adventure ride on with the Seeker 6L Bike Hydration pack. Light and weather-tight, this hip pack serves up a full two liters of water storage with room to stow food, a layer and day-ride essentials, plus the straps to lash on a wind or rain shell for unpredictable weather. A quick-access hip belt pocket puts small items within easy reach and compression straps cinch the whole bag down when your load is light. - Limited Lifetime Warranty - 2L / 70oz Hydrapak lumbar reservoir with quick disconnect - High-flow Blaster bite valve with shut-off and magnetic hose clip - Lightweight, weather-tight construction - Thermoformed 3D back panel - Zippered hipbelt pocket - Internal organizer pockets - External carry straps - Side compression straps - Reflective logo - Safety-light attachment

The Session 8L bike hydration pack is a minimalist, yet full-featured pack combining the cooling comfort of a breathable back panel with airy shoulder straps. This narrow, lightweight pack features a 2-liter vertical hydration reservoir with a bite valve. The pack offers plenty of storage including an organized front pocket, a fleece-lined sunglass pocket, additional side pockets plus external attachment straps. The Session is a do-it-all bike pack to keep you out all day on the trails. - 2L / 70 oz Hydrapak reservoir - Phaser bite valve - Breathable Air Flow backpanel and shoulder straps - External attachment straps - Fleece-lined sunglass pocket - Internal organizer pockets - Safety light attachment - Integrated rescue whistle / sternum strap

The Women's Session 8L is a lightweight, compact hydration pack with dedicated storage for trail essentials. The women's-specific fit of this lightweight pack ensures minimal shifting and evenly distributed weight, while the breathable airflow back panel and shoulder straps keep you cool out on the trail by minimizing hot spots. The Women's Session stores 2-liters of vertical hydration, plus features a dedicated fleece-lined sunglass pocket, internal organizer pockets, as well as additional safety features. Stay lightweight and compact out on the trails with the Women's Session 8L bike pack. - Women's-specific fit - 2L / 70 oz Hydrapak reservoir - Phaser bite valve - Breathable Air Flow back panel and shoulder straps - External attachment straps - Fleece-lined sunglass pocket - Internal organizer pockets - Safety light attachment - Integrated rescue whistle/sternum strap

The all-new Range Torque Wrench + Ratchet Wrench Combo simplifies proper bike maintenance by combining the precision of a bar-style torque wrench and speed of 2-way ratchet wrench in a compact, lightweight and portable package. There’s no need to set a specific indexed torque, or go searching for missing bits – select your bit from the case’s labeled inserts, ratchet for quick thread engagement and use the torque head to match manufacturer specifications for torque. - Ratchet wrench for speed; torque wrench for precision - Portable and light – fits in a ride pack or travel-transport - Infinite torque capabilities within the 2-10Nm range - 2-way ratchet wrench protects the integrity of torque wrench function - 6-degree ratchet engagement maneuvers in tight spaces - Torque validation for “bolt-checks” on any bicycle components - Compact head and bit design allows clearance and full function in tight spaces - 14 labeled S2 Steel* allen key, torx bit, and Phillips head bits covering the most common bicycle applications - #2 Philips; Torx: T10 , T20, T25, T30; Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm; - Extended length: 5mm Hex & T25 Torx - User ‘zero’ ensures accuracy of the torque bar for every use - 3rd-party tested and validated for accuracy and longevity (exceeds ISO standard) *S2 Steel is industry-leading tool steel for precision edges and durability

When a pack that holds only water is too small and a pack that holds everything is too big, the Siskin 8 is just right. A high-performing mountain biking pack that provides stability and comfort on the gnarliest of trails, the Siskin allows you to bring just what you need (and nothing more) on your ride. A direct-access zip path leads to an included 2.5-liter reservoir, and a U-zip main compartment opens wide to stuff a spare tube, flat repair tools, and your PB&J inside. A mesh-covered foam backpanel offers ventilation and allows for lively movement while keeping your pack close to your body, even when you're riding loose. The front of the pack features a LidLock attachment point for a standard-size helmet, while side compression straps expand to fit a full face. VARIABLE HELMET CARRY - Includes Osprey's LidLock helmet carry for traditional helmets and front panel upper compression straps for full face helmets. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment to protect pack contents from accidental spills. MOUNTAIN BIKE-FOCUSED FEATURES - Multi-pocketed tool organization and large bucket main compartment stores and protects all your essential gear. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. FEATURES - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak with direct-zip access - Magnetic sternum strap bite valve attachment - Dual upper side compression straps double as a full face helmet carry - Full front panel U-zip to main compartment and tool organization - Front panel shove-it pocket - LidLock helmet attachment - Blinker light attachment - Zippered hipbelt pockets - Zippered scratch-free, heat-embossed slash pocket AIRSCAPE SUSPENSION - Atilon foam framesheet enables dynamic body movement and evenly distrubutes load across the entire backpanel AIRSCAPE BACKPANEL - Mesh-covered extra deep ridged foam with center air channel allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Soft breathable spacermesh contact surfaces and die-cut foam ventilation - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability

Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.

The Globe Front Rack bolts directly to the two mounts on the head tube to create a tough-as-nails platform for carrying whatever your heart desires. By mounting directly to the bike frame, heavy loads can be distributed with minimal effect on handling and stability. It's also compatible with the Globe Haul's front and rear pannier adapters, allowing you to carry 5+ full grocery bags. The T-channel rail material means you can bolt on additional accessories to the sides to further customize your setup. It also accepts MIK accessories, like the MIK adapter & Turbo Basket, for fast and secure installation. - Designed for frictionless compatibility with Haul ST and Haul LT. - MIK accessory-compatible. - T-channel rail construction. - 20kg (44lb) load capacity. 30cm length, 32cm width - Installation requires tools (not included).

These fork-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low position maximizes handling stability, and this front option leaves the rear rack open for carrying passengers or even more cargo options. *Third-party panniers are not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two adapters (one for each side of the fork) and all required hardware. - 8kg (18lb) load capacity per side. - All tools required for assembly included with the purchase of the Haul ST or Haul LT bike

These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).

The Handlebar Bag provides easy-access storage and works just as well on urban missions as on gravel escapes. Slide it onto the handlebar frame and fasten it with straps (note that the handlebar frame is not included and must be bought separately for the handlebar bag to function on a bike). Should you not want to leave it on your bike, it detaches easily and you can carry it with the removable shoulder strap. Elastic mesh pockets on the top and sides for items you want close at hand. Two attachment points on the front for tent poles, accessories, or the Specialized/Fjällräven Snack Bag. Note: The lid and seams are not sealed, but the lining is waterproof, so the bag offers protection from the rain. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Weather-resistant, semi-rigid design in Vinylon F with lining in 100% recycled nylon. - One-hand easy-opening closure with an elastic cord loop. - Mesh pockets on top and sides and zippered inside pockets. - Reflective logo increases your visibility in low-light conditions. - Volume- approx. 10 L - Material- Vinylon F (100% vinylal)

Versatile aluminum frame rack for transporting everything from postal packages to drybags or a tent on your bike. Attaches directly to the handlebar (fits handlebars with 31.8 mm diameter) and works with all types of bikes, except extreme downhill bikes. An anti-rotation guyline prevents the frame rack from tilting forward. Webbing straps to attach gear are not included. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Light and strong aluminum construction. - Three under-rack accessory mounting holes for lights, cameras, etc. - Max load of 5kg. - Fits handlebars with 31.8 mm diameter and works with most types, including straight and drop models. - Compatible with Specialized's Future Shock suspension system. - Dimensions: 20 x 18 x 13 cm.

The Surly Little Dummy Bag is a 15L sling-style bag designed to work with your standard rear rack and help you carry grocery bags, fishing poles, and other oddly shaped ephemera. Unlike traditional panniers that clip on and off real fast, we wanted a cargo solution that you could leave mounted to your bike when you're off playing laser tag. The idea is you just throw your backpack or whatever in there, turn the cranks awhile, and then pull out your gear when you've arrived. Quite slick. You can still scatter schoolbooks and loose cans of tuna inside the Little Dummy if you want, but the bag-within-a-bag method makes unpacking quicker. Use the system of daisy chains and One-Wrap straps to secure baguettes, flutes, and other stuff that might stick out. Cinch the side straps to further stabilize your load. And for extra credit, use your favorite Surly Whip Lash or Junk Strap to make your setup work the way you want. There's also a small zippered compartment inside the bag, if you're into pockets. Oh, and we should also probably mention that the bag's 1680D nylon main body and 400D nylon liner are bluesign Approved. So are the buckles and other hardware. That means the materials are sustainably produced to have the lowest possible impact on humanoids and our environment. Compatible with most standard rear racks, the Surly Little Dummy Bag is a sling-style bag designed to help riders haul big awkward items more easily. Secure your backpack, groceries, or camping gear inside the sling when it's time to ride. When you've arrived at your destination, quickly grab your stuff and leave the Little Dummy Bag mounted to your bike. You're unstoppable now. - A system of daisy chains and One-Wrap straps can be used to secure large, odd-shaped items - Interior zipper pocket - 25-lb. bag capacity. Consult your rack's weight limitations - 15L total volume

Designed to pair with the Surly 8-Pack Rack and similar porteur-style front racks, the Petite Porteur House Bag attaches easily via three adjustable straps. Featuring a refined pocket strategy, a classic roll top and structured body for added stability, and a bunch of webbing loops for attaching lights and lashing straps, there’s nothing petite about the possibilities here. - Includes two One-Wrap straps and one accessory bungee for securing loads of different shapes and sizes - Large main compartment, one large front pocket, and two smaller pockets in back - 25-lb. bag capacity. Consult your rack’s weight limitations - Dimensions when Rolled: 275 x 190 x 240mm - Dimensions when Unrolled: 275 x 190 x 400mm - Main body 1680D nylon, Liner 400D nylon. Bag fabric and hardware are bluesign Approved, which means the materials are sustainably produced to have the lowest possible impact on people and the environment - 11L volume Specifications: - Number of Compartments: 5 - Access Style: Roll Top - Primary Material: 1680D Nylon with polyurethane coating - Waterproof: No

This titanium, insulated iteration of the well-loved Podium bottle elevates your everyday bottle while keeping your hydration cold. Ice your competition Push the envelope without tipping the scales. Weighing in at just 240 grams, the Podium® Titanium bike bottle is where form and function meet, combining unparalleled strength and feather-light agility to help you find your flow even faster. Made from premium, vacuum-insulated titanium, it's built from the ground up to meet the demands of discerning riders who want to curate their kit down to the very last detail. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - 240 Grams - Ultra lightweight design—we're serious - Hours Cold - 7 hours - No Squeeze Required - Just grab, lift, and sip - Titanium Body Material - Lightweight meets durability - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping you water colder for longer.

A weather-resistant, bikepacking-inspired / urban-inspired seat pack bag with built-in accommodation for a U-lock. Ideal for the commuting trunk bag user who doesn't want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Water-resistant stitched construction. - Heavy-duty seat rail buckle and straps, pull up to tighten. - 3 rubberized, modular seatpost straps with CAMLOCK, ensure things stay tight, while eliminating potential damage to clothing. Can use 2 or 3, in varied positions. - Top mount bungee system with wings, provides optimum stability to top loads, etc... - Top bungee system for additional, flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle, ensure ample leg clearance, even if heavily loaded. - Built-in U-lock holder. - Rear light clip.

A highly functional trunk bag with a thermal-lined main compartment. Optimized for use as an insulated lunch bag. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Washable reflective interior is ideal for carry beverages/food. MOUNTING SYSTEM - Lightweight, universal Velcro attachment system attaches to top of rack ADDED BENEFIT - Insulated main compartment is ideal for beverages/food and helps keep contents cool/warm - Side mesh pockets - Rear zippered pocket - Carry handles for added convenience - Volume 9.0 L / 549 cu in - Weight 414g / 0.91 lbs

Any ride, any weather, Banjo Brothers' Minnehaha Commuter Backpack is your trusty carry-it-all companion. Its classic, heavy-duty 20-ounce cotton canvas construction is treated with dry-wax water repellent. And it features Banjo's proven fully downpour-proof inner liner to keep your gear dry in any condition. Wide, padded straps evenly distribute weight comfortably on the bike or off, while a chest strap adds stability. It sits low on the back to reduce blind spots. And, there are two quick-access side pockets, a shoulder-strap-mounted phone holder, and a blinkie tab.

Take your Burley all over town with the 2-Wheel Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. Leveling springs keep the stroller grounded on uneven terrain. Get out and explore with added versatility. - Easy conversion from biking to strolling - Fully pivoting wheels provide optimal maneuverability - Wheels easily slide into the trailer mounts - Includes: 8-inch Stroller Wheels (2) & Wrist Tether - Compatible with: 2019 – D’Lite X, 2019 – D’Lite Single, 2019 – Cub X, 2019 – Encore X, 2007-Current – D’Lite, 2007-Current – Encore, 2007-2018 – Solo, & 2010-2018 – Cub

By bike or on foot, this durable tote bag is a great option for keeping cargo secure and accessible. Featuring an open top design for taller items and cinch side webbing to keep smaller items enclosed, this versatile bag will become your go-to for gear-hauling, shopping, and more. You’ll Love – - Flexible storage space with 40-liter main compartment - Durable materials and construction hold up to daily use - Side cinch webbing to keep gear secure - Removable rigid base provides stable platform for cargo - Stowable bag clips (4) easily connect the bag to the Travoy cargo trailer - Interior and exterior slip pockets - Side carrying straps for off-bike use - Light loop for accessory lighting

Burley's Stroller Kit easily converts Burley's child and pet trailers into strollers, making it possible to walk and jog with them. It includes a stroller wheel that folds up for convenience as well as a parking brake and wrist tether for security. • Stroller wheel stays attached and folds up out of the way when cycling • Tool-free adjustment makes switching from bike to stroll mode simple • Adjustable tracking makes for consistent, easy rolling • Burley's easy-glide tow bar retracts closer to the trailer for easy maneuverability • Stroller wheel pushes easily Compatible with: 2007-Current D'Lite 2007-Current Encore 2007-Current Solo 2007-Current Cub 2007-Current Honey Bee 2008-Current Tail Wagon