Wheels

The Logic rim uses a wider 35mm profile with a thick sidewall, which makes the rim strong and resilient to sideways impacts that can happen from anything between under-rotating a flair or over-rotating a hard 360 out of a rail. - Very strong reinforced spoke hole design - Extra-thick sidewalls to resist denting under harsh conditions

The Rampage rear wheel rolls on a four-bearing sealed freecoaster hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly (heat-treated) - Driver: 1-pc chromoly RHD or LHD - Hardware: Steel(17mm wheel nuts) - Hub shell bearings: 6002 (x1) & 7902 (x1) verify bearing number on side of rubber seal - Drilling: 36H - Weight: 46.4-ounces

Wheel Freehub Kit—XD Driver Body Kit—Zipp ZM2 - Compatible With: WH-MOTO-30-B1

The Muc-Off Ultimate Tubeless Kit contains everything needed to get a tubeless-ready wheelset set up and ready to roll. Each Kit contains Tubeless Rim Tape, two CNC-machined black tubeless valves and two pouches of No Puncture Hassle Tubeless Sealant.

Elevating Weekend Hot Laps to World Cup XC Status From weekend hot laps to World Cup XC finals, the Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs. An unmatched level of durability, precision, and performance in this new Carbon Control wheelset that is purpose-built to open terrain, from gut-wrenching climbs to tear-inducing descents – a whole new era of riding. A high-performance wheel that excels everywhere from world cup xc races to your favorite weekend trail. The Control Carbon combines the low weight and strength found in our world-beating Control SL rim with the new DT Swiss 350 hubs and spokes. This level of quality, precision and performance has previously been found only on wheels costing twice as much. - Rim: Control SL 29, 29mm Internal Width, Zero Bead Hook 4mm FlatTop Design, Tubeless Compatible, Compatible with Tire Inserts - Spoke Pattern: 28-Hole Two-cross (1:1) Non Driveside Front and 28-Hole Two-cross (1:1) Rear - Spoke Type: DT Competition Race Straighpull—Front Driveside 301mm, Non-Driveside 300mm , Rear Driveside 298mm, Non-Driveside 301mm - Nipple Type: DT Swiss Hexagonal Prolock Alloy - Hub: DT Swiss 350 Straight-pull, 6-bolt, 36t Star Ratchet System, 110x15mm & 148x12mm thru-axle compatible - Weight: Set—1450g w/ Tubeless Rim Tape - Assembly Method: Hand-built - Extras: 19 and 31mm OD end cap options included, Roval Spoke Kit, Tubeless Rim Tape and Valves, Lifetime warranty - System Weight Limit: 275lbs/125kg

Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. -Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs -100 mm front hub spacing only -CNC-machined AL-6061

This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.

Boostinators are hub specific conversions designed to take non-boost hubs and convert them to boost compatibility. Don't toss out that wheelset - Boostinate it.

Convert your ISO, ISO B, or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. The conversion kit is complete with an axle, adjustment clamp, driveshell and all driveshell internals for a plug-and-play swap. Micro Spline Driveshell Instructions - Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX - Compatible with ISO 142x12mm, ISO B 148x12mm, and ISO Superboost DH 157x12mm rear hubs.

- Sta-Tru Wheels ST725 silver anodized alloy single wall rims w/ 36holes - Attractive 21mm tall aero profile, and includes a nice 10.5mmbraketrack with wear indicator - Road style KT alloy road hub adds value - 36 UCP spokes

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many tandem hubs - Type: Solid Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 187mm - 1 axle per bag

- Zipp's most advanced and fastest deep-rim wheel for road, triathlon, and time trialing - More than 300 grams lighter that previous model - Optimized tire bed for easy tire installation - Sawtooth rim with Hyperfoil nodes and HexFin ABLC dimple pattern for top aero and crosswind-stability performance with an undulating rim depth - Cognition V2 hubset rolls efficiently whether you are pedaling or coasting. Its Axial Clutch V2 technology reduces drag and lowers friction - Center locking rotor interface. Lockring is included with the wheels - Zipp graphics applied using Zipp's ImPress direct-print technology - Minimum 25mm tire width - Lifetime Warranty - Wheel Diameter/ISO: 700C / 622 - Wheel Tire Type: Hookless - Tubeless

Whisky Parts Co. Tubeless Rim Tape.

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 126mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 137mm - 1 axle per bag

- TSE design with 23mm internal width with tubeless and hookless rim profile ideal for wider tires at lower tire pressure - Minimum 25mm tire width - More than 300 g lighter than previous model - ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement - An all-out aero 80mm rim profile - ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel - Center locking rotor interface. Lockring is included - Lifetime warranty

- Tough on trail and light on price rated for everything from XC to Enduro and E-bike - Steel axles cartridge bearings robust alloy hub shell and steel cassette body - 10-degree pawl engagement - International Standard 6-bolt disc mount - *Shimano/SRAM

Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

An unexpected rough section on your ride? No problem with this rim. Looking for a bomb-proof rim to build up your Gravel, Cyclocross, or adventure bike? Then it's definitely worth taking a look at the RR 521 rim. 32mm deep and 20mm wide, this modern road rim could have been classified as a Cross Country rim just a few years ago. Nowadays it's just a great offer to widen your ride... with drop bars.

The pinnacle among the hubs–Ratchet EXP united with SINC ceramic bearings. The premium 180 hub convinces with its sophisticated Ratchet EXP technology, giving the hub extra lightness, stiffness, and precision along with easy, no-tool maintenance. Furthermore, assembled with the low-friction SINC ceramic bearings, the hub performs efficiently and brings your power directly to the road. The hub is available for straight pull spokes only.

Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

EX 1700 SPLINE wheels are built on 36t ratchet hubs combined with a super strong and welded 30 mm wide aluminum rim. The rim profile is designed to withstand the hardest use of Enduro racing while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

Sleeved 30mm Enduro rim, ready to eat rocks. Bringing wide profiles to the most demanding enduro riders, both price- and performance-wise. A sibling of our EWS-winning welded rims, the E 532 packs the materials and technology the world's fastest racers use and puts it into an affordable rim for everyday chargers.

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape

As versatile as it is robust—a rim for all surfaces! Anyone wanting to build a reliable, super-stiff wheel is starting in the right place with the RR 511. Thanks to a state-of-the-art alloy and surface treatment, this extremely robust 32mm high semi-aero rim is lighter than you would think. And, those thinking of using it on Gravel or Cyclocross courses can easily install tubeless tires.

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance, built on reliable and smooth rolling 350 hubs. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications