Cables

Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.

Road Pro kits deliver enhanced performance and style. Teflon-coated cables used with our Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all the needed parts included, our Road Pro kits are easy to install. - Teflon-coated cables, Slick-Lube liners, and Kevlar reinforced, compressionless brake housing enhance performance - All parts needed for a complete brake and shift cable/housing install are included - A step above standard OEM cables and housing - Appearance options from classic to colorful What's Included: 1 1700mm LEX-SL Shift Housing 2 2300mm Teflon-Coated Shift Inner Cables 4 Lined Shift Alloy End Caps 1 Sealed Shift Alloy End Cap 1 Hooded Shift Alloy End Cap 2 Shift Cable Tips 1 1700mm KEB-SL Kevlar-Reinforced Brake Housing 1 850mm Teflon-Coated Front Brake Inner Cable 1 1650mm Teflon-Coated Rear Brake Inner Cable 2 Open Brake Alloy End Caps 2 Lined Brake Alloy End Caps 2 POP Alloy End Caps 2 Brake Cable Tips 4 Mini Tube Tops 9 Cable Donuts 3 Rotating Hooks 2 EZ-Bend Housing Segments

Mountain Pro kits offer both enhanced performance and style. But unlike Road Pro Kits, shift and brake systems are sold separately. Teflon-coated cables used with our Slick-Lube liners dramatically reduce friction while compressionless shift housing delivers smooth, precise shifting performance. And, with all the needed parts included, our Mountain Pro kits are easy to install. - Teflon-coated cables, Slick-Lube liners, and compressionless housing enhance performance - Designed to keep gunk out - enough housing for continuous runs, including seal liners if a bike has stops - A step above standard OEM cables and housing - Mountain Pro Shift kits are available in colors that match Jagwire Mountain Pro hydraulic hose kits What's Included: 1 3200mm LEX-SL Shift Housing 1 1500mm Teflon-Coated Front Shift Inner Cable 1 2300mm Teflon-Coated Rear Shift Inner Cable 3 Sealed Alloy End Caps 6 Lined Alloy End Caps 2 Hooded Alloy End Caps 2 Cable Tips 2 4G Tube Tops 6 Cable Donuts 2 Rotating Hooks 1 2100mm Sealing Liner

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables. - Slick cables are die-extruded for smooth operation - Pre-stretched - SRAM/Shimano mountain compatible cable end - Stainless steel construction resists corrosion - Single end cable features weld-cut for easy installation

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4 and 4.5mm diameters. Match the diameter of the housing sections on your bike. - Comes in a pack of 10

Extend housing runs using these double-ended junction end caps.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have fluted, rubber-coated rings for easy turning by hand.

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Compatible with 4mm or 5mm housings

Rotating S-hooks securely hold housing segments together and prevent undue noise and migration. - Two halves rotate 360 degrees - Connects 4mm or 5mm housing to electronic shift wire

Jagwire's Universal Cable Tips are crimp-on aluminum caps for finishing the ends of 1.8mm and smaller diameter cables. They prevent the cables from fraying and come in colors to add style to your ride. Choose from two color mixes in bottles of 30.

The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing (2.9 oz). - Black - 60 – 65mm

- Stainless steel die-pulled and polished slick brake cable for smooth, crisp, and reliable braking - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm

- Stainless steel die-pulled and polished slick brake cable for smooth, crisp, and reliable braking - SRAM/Shimano compatible head - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.5mm - Style: Road

- Time saving system for managing brake cables on Break-Away bikes - Light threaded alloy barrels with rubber noise dampener

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

Stainless steel cables are extruded to provide a smooth, low-friction surface.

- Wet or muddy condition cable sealing solution - 4/6mm

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

- Wire hook for electronic shift and brake housing - 2.5mm E-Shift + 5.0mm Brake

- Stainless steel die-pulled and polished slick gear cable for smooth, fast, accurate, and reliable shifting - SRAM/Shimano compatible head for both MTB and Road applications - Extra-long 2800mm cable length - Use: Front or Rear - Length: 2800mm - Diameter: 1.1mm

- Stainless steel shifter cable - PTFE-coated for reduced friction - Length: 2000mm - 1.1mm compatible with Shimano, SRAM, and Campagnolo shifters - 1.2mm compatible with Shimano and SRAM shifters

SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

- BMX brake cable kits for front or rear application - 1.5mm galvanized inner slick cable - Cable length: 1700mm / 67-inches - Housing length: 1750mm / 69-inches

- Jagwire disc brake hose parts protectors - Black - 5-pack

- MTB or Road - Stainless steel - 1.5mm diameter - 2000mm length