Accessories

- Drift and over axle set for common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents

Bike, walk, or jog to your favorite local activities with your children thanks to Sunlite's versatile Convertible Trailer Tot. Adjustable seats sit two children comfortably and a steel, powder-coated frame with bumper guards keeps your precious ones safe. The Trailer Tot's 600D polyester covering provides shade and protection, while 20-inch, aluminum, quick-release wheels roll smoothly down the road. So stow some snacks and toys in the rear compartment, grab coffee for the cup holder, and go explore your neighborhood.

- Professional quality folding repair stand - Telescoping center pole and folding base make it easy to transport and store - 360-degree clamp rotation with quick release lever - Includes: Work Tray

Joker Combination Wrench Set

This Wheels Manufacturing Sealed Bearing Extractor Set removes sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch. - 12-piece set (Individual replacement extractors and parts are also available) - Made in the USA Set includes: - (1) Clear Plastic storage container - (1) 8mm ID Bearing Extractor - (1) 9mm ID Bearing Extractor - (1) 9.5mm ID Bearing Extractor - (1) 10mm ID Bearing Extractor - (1) 12mm ID Bearing Extractor - (1) 15mm ID Bearing Extractor - (1) 17mm ID Bearing Extractor - (1) 20mm ID Bearing Extractor - (1) 22mm ID Bearing Extractor - (1) 24mm ID Bearing Extractor - (1) 25mm ID Bearing Extractor - (1) 30mm ID Bearing Extractor - (1) Spare parts bag containing bolt sets for extractors

At nearly 20% lighter than our (already) lightweight stand collection, the Ultralight takes no performance shortcuts to achieve its feathery 10.6lb (4.8kg) total weight. Despite a slender scale reading it still possess the same durability and stability of our other stands. With the 360° rotating Slide-Lock clamp and a 54? (137cm) wide base with rubber-coated end caps, confidence in the security of your bike is never in question. And when the service day is done, it folds in to a space-saving unit for storage or travel. Look to our Tool Tray and Pro Truing Station upgrades to create the optimal home bike maintenance setup.

Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame

Battery anxiety? Not with a Turbo SL. Our discreet and compact SL Range-Extender Battery provides up to 40 additional miles (64km) of mountain-flattening power. More range, more riding. - Only available for purchase at your local dealer. - 160Wh capacity delivers up to one additional hour of riding. - Compatible with Turbo SL Bikes. - Includes a 3 LED charge-level indicator. - SL Range Extender Cable 220mm ROAD 98920-5655 SOLD SEPARATELY. - SL Range Extender Cable 160mm MTB 98920-5650 SOLD SEPARATELY.

FLOW is our high-end Performance mountainbike protector backpack with an integrated and removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. The daypack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me waist support belt that makes the pack totally bounce free on your back without cramping your style. - Zero bounce with NDM2.0 + Snug Me – The No Dancing Monkey 2.0 harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - NDM Buckle-Technical buckle for a more secure closure and a better fit . - Stay protected – Worry less about falling over and more about how to gain speed with the removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. ZERO BOUNCE ON THE TRAIL MOUNTAINBIKE CRUSADES With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the NDM 2.0 + Snug Me harness you’re going to get the best fitting sports backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system, armor attachment points, and a removable Lev.1CE-Certified by SAS-TEC full back protector that makes this pack perfect for your freeride or enduro bike adventure. CARRY YOUR GEAR The FLOW 16 MTB backpack has a total storage of 16L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles or personal gadgets. We even threw in a microfiber cleaner tissue, we thought of everything! You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style. STAY HYDRATED Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps.

Next-level protector backpack with outstanding carrying comfort and maximum ventilation. 10 Years of back-protection technology experience led into the revolutionary AIRSHIELD protector concept, combining highest standards in safety with a maximum in carrying comfort for ambitious enduro riding. - Next-level protector technology AIRSHIELD with highest shock-absorption properties - 360° ventilation for ultimate carrying comfort - 2 hip belt pouches (one elastic + one zipable) - Hydration system compartment & tool compartment - XC/DH Helmet carry - Seamless shoulder straps & height-adjustable hip belt

Light and Motion Seca Comp 2000, with a perfect combination of high power in a compact, two-battery integrated design, is able to achieve a powerful output without quickly fading. A penetrating LED array gives a powerful spot beam in conjunction with a diffused flood beam ideal for both road and trail use to provide an exceptional range of vision for rides. Amber sidelights and a daytime pulse mode ensure road visibility and a secondary button allows the side lighting to be turned off when on the trail. - 2000 Lumen output certified to the FL-1 Standard - Engineered with a 3 LED array using the highest level CREE LEDs - Sealed, waterproof design tested to 1 meter for all conditions reliability - Beam pattern was engineered to maximize visibility at high velocity with ample beam distance lead-time and the widest beam angle for the sharpest turns - Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours - Accurate battery status indication illuminates the power button with three different colors to clearly display remaining battery life with 4 levels - Run times: 1:30 – 9 hrs over 6 modes

Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included rack.

Will Ship within a week. When tire pressure matters, the Truth is your answer. Accurate to 0.2% and compensating for temperature, humidity, and elevation this is anything but just another gauge. - 100% Made in USA - 0.2% accurate between 0-60 psi - .5% at 100psi - 1% at 200psi - 3D Printed titanium body - Aluminum bleed valve - .1psi per minute bleed capability - 9v battery - 1,200 hour battery life - Temperature range 0 to 120F

Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-9C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits PRS-6, PRS-7, and PRS-8 stands made before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

The 2197 is an add-on accessory for the Park Tool DT-5 and DT-5.2 Disc Brake Mount Facing Set to enable easier and more efficient facing of disc brake mounts on carbon fiber frames. Features a brazed-on diamond grit surface that is over 100 times more durable and effective on carbon fiber than the cutter included with the DT-5.2. The 2197 sits between the cutter of the DT-5.2 and the brake mount, and smoothly and evenly grinds the mounting surface until it is flat and properly perpendicular to the rotor. NOTE: The 2197 is intended for facing carbon fiber only. Aluminum, steel, and titanium disc brake mounts should be faced using the #2171 facing cutter included with the DT-5.2. For carbon frames that feature aluminum inserts (with a carbon/aluminum hybrid mounting surface), use the #2197. When machining carbon fiber, regularly apply water (or a similar solution) to the cutting surface.

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-5C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing, and feature replaceable jaw covers. - Fits PCS-4, PRS-5, PRS-6, and PRS-7 stands made after 6/96 - Fits bike frame tubes from 1" to 1 5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool's Frame and Fork Taps cut easily and fit conventional tap handles. - Tap-12.1: 12Mm X 1.0 - Tap-12.2: 12Mm X 1.5 - Tap-12.3: 12Mm X 1.75 - Tap-15.1: 15Mm X 1.0 - Tap-15.2: 15Mm X 1.5 - Tap-20.1: 20Mm X 1.0 - Tap-20.2: 20Mm X 1.5 - Tap-20.3: 20Mm X 2.0

- Go longer than ever with solar charging that gives you unlimited battery life in smartwatch mode (assuming all-day wear with 3 hours per day outside in 50,000 lux conditions) - Rugged GPS smartwatch is water-rated to 100 meters and thermal- and shock resistant with fiber-reinforced polymer case and scratch-resistant Corning Gorilla glass - Built-in sports apps to take on running, biking, swimming, strength training and more; plus, VO2 Max and other training features - Live the ultimate connected life with smart notifications and Connect IQ compatibility when paired with your compatible smartphone. - Track your adventures with the built-in 3-axis compass and barometric altimeter, plus multiple global navigation satellite systems (GPS, GLONASS and Galileo) - Understand your body better with all-day health monitoring features that track your heart rate, sleep, Pulse

The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”

A pro level workstand with a built-in digital weight scale. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening / releasing the clamp with ease. Clamp Head Non-marring rubber jaws 360° rotation Digital weight scale Clamp Height 122 cm to 183 cm (48” - 72”) Clamp Opening 1.9 cm to 4.5 cm (0.75” - 1.8”)

A pro-level work stand with a built-in closable small parts bin. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening/releasing the clamp with ease. Clamp Head: Non-marring rubber jaws, 360° rotation Clamp Height: 107cm to 178cm (42" – 70") Clamp Opening: 1.9cm to 4.5cm (0.75" – 1.8") Folding: Two QR clamps Base: HD folding 6061 T6 tubes Max Weight Capacity: 25kg / 55lb Added Features: Carry bag, Rubber base feet, Clamp lever, Closable small parts bin Size: 17.8 x 117cm / 7.0" x 46.0" (Folded); 135cm / 53.1" (Base Diameter) Weight: 6kg / 13.23lb

Ever wonder why so many Tour de France and professional mechanics rely on dropout-style wash and work stands? It’s because they can adapt to virtually any bike quickly and easily, offer a rotating platform, and have great stability for precision work – at least that’s the case with the award-winning Sprint Repair Stand. The compact and portable design accommodates almost any frame and it’s stable platform and durable construction is ready to take your bike maintenance to the next level.

The Deluxe Wall-Mount Repair Stand easily mounts to any post or wall stud. This shop-quality stand places the bike approximately 14.5 inches from the wall, so you'll have plenty of work space. The awesome clamp is Park's Adjustable Linkage model, which feature's replaceable rubber jaws; fits seatposts and frame tubes from 1 to 1 5/8-inch diameter; includes recesses for cable housing and rotates 360 degrees for optimum bike positioning. This great stand lets you work on your bikes just like a pro and is built to last.

Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

Updated with a smoother, more solid rotation system! Originally designed for professional Pro Tour mechanics. The PRS-22.2 firmly holds any bike without clamping the frame or seat post by supporting the bottom bracket then locking either the front or rear dropouts. Works with any style axle system, including quick release and all sizes of thru-axles without cumbersome adaptors. Ideal for cleaning and general repair work, the PRS-22.2 features a solid tripod base and folds compactly for storage or transport. - Precisely constructed of anodized 6063 T6 lightweight aluminum and durable composites (12.5lbs, 5.67kg) - Adjustable BB height of 30" to 45" / 76cm to 114cm - 360 degree horizontal rotation allows easy access to all sides of the bike - Customizable bottom bracket supports accommodate a wide variety of BB shells - Main beam is adjustable fore and aft to customize balance points - Adjustable collar features receivers for optional accessories (sold separately) 106 Work Tray and PHT-1 Paper Towel Holder - Easily transported in the BAG-20 (sold separately)

Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.

Your tires are the only thing connecting you to the road or trail, and having optimal tire pressure can have more impact on ride comfort than both frame and wheel choice combined. But finding the right tire pressure requires trial and error. TyreWiz is the first-of-its-kind tire pressure sensor for riders of gravel bikes and road bikes, taking the guesswork out of finding that optimal tire pressure. Lightweight and durable, TyreWiz adds only 10 grams to your tires. With an IPX7 waterproof and dustproof rating, you can confidently ride on any type of trail and know that your tire pressure sensor will keep going strong. TyreWiz reports data with +/-2% accuracy at a resolution of .1 PSI; vastly more accurate than any tire pump on the market. TyreWiz monitors the air pressure in real-time and relays the data to a cycling computer or a smartphone. That information is relayed to the SRAM AXS app and delivers personalized recommendations and pressure alerts. TyreWiz gives riders access to highly accurate, real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. Features - Designed for road and gravel riders. - Personalized tire recommendations in the smartphone app for iOS and Android. - Data reported with +/- 2% accuracy at .1 PSI resolution. - Broadly compatible with tires that use a removable Presta-style valve core. - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours. - IPX7 dustproof/waterproof rating. - Box includes valve-core removal tool for installation.

Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure. - Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact - Each pad comes with two strap extenders for eMTBs - Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times - Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage - Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate - Full-size (up to 6 bikes) - for Full Size Trucks (F-150 to F-350, 1500 - 3500 series, Tundra and Titan)